Skip to content

Cart

Your cart is empty

Article: How to Repurpose Failed Sublimation Tumblers: 3 Creative Ideas

Sublimation Guides

How to Repurpose Failed Sublimation Tumblers: 3 Creative Ideas

Three creative ways to repurpose failed sublimation tumblers.

Not every sublimation tumbler turns out the way you expected. You might end up with ghosting, unexpected colors, uneven transfers, or small printing flaws. But that doesn’t mean the tumbler has to go straight into the trash.

As long as the tumbler itself is still in good condition, a little creativity can give it a whole new look. This guide covers three practical ways to repurpose failed stainless steel sublimation tumblers. Take a look and see which method works best for you!

If you're new to sublimation and often end up with tumblers that don't turn out as expected, check out our sublimation tumbler guide. Follow our tutorials and tips to avoid common mistakes and create beautiful sublimation tumblers.

Repurpose Failed Sublimation Tumblers with Epoxy

Epoxy is a versatile material for giving failed sublimation tumblers a makeover. You don’t need to spend time removing the original design. Instead, add a new decorative layer to cover imperfections and create a completely different look.

Before applying epoxy, make sure the original coating isn’t damaged, peeling, or flaking. Always work in a well-ventilated area and follow the product instructions. Pair this process with our "How to Make a Personalized Epoxy Tumbler" guide to complete the steps below.

Here are two ways to give stainless steel sublimation tumblers a fresh new look with epoxy.

Cover the Original Design with Glitter

Glitter is a great way to cover an existing sublimation design and turn a failed stainless steel tumbler into a sparkling new creation.

You can use a single glitter color for a clean, uniform look. Or mix multiple shades to create an ombre or rainbow effect.

How to do it:

  1. Choose your glitter color or color combination. Make sure it provides enough coverage to hide the original design.
  2. Prepare the stainless steel tumbler according to the epoxy resin product instructions. Make sure the surface is clean and completely dry.
  3. Place the tumbler on a tumbler turner and apply a thin, even coat of epoxy resin.
  4. Sprinkle glitter over the wet epoxy layer to achieve your desired look.
  5. Let the epoxy resin cure completely according to the product instructions. For a smooth finish and to seal the glitter, apply another coat of epoxy resin as a topcoat.

Helpful Tip: If the original sublimation design has very dark colors, a thin layer of glitter may not cover it completely. You may need to use more glitter or apply multiple layers for better coverage.

Cover the Original Design with Resin Pigments

Mix different resin pigments into epoxy resin to create a wide range of designs. You can make marble patterns, color gradients, abstract swirls, and more. This turns an imperfect sublimation tumbler into a more artistic creation.

How to do it:

  1. Choose the resin pigment colors you need based on your design.
  2. Divide the epoxy resin into separate mixing cups according to the manufacturer's mixing instructions.
  3. Add the appropriate amount of resin pigment to each cup. Stir thoroughly until the colors are evenly mixed.
  4. Place the tumbler on a tumbler turner. Apply the colored resin to the tumbler according to your desired design. Layer different colors to create swirls or marble effects.
  5. Keep the tumbler rotating on the turner until the resin has fully cured.

Helpful Tip: You can also use mica powder on its own or combine it with resin pigments. This creates epoxy tumblers with richer colors and more interesting textures.

Give Failed Sublimation Tumblers a Rhinestone Makeover

If your sublimation tumbler doesn’t turn out as expected, you can cover it with rhinestones to create a shiny, eye-catching look.

Rhinestones come in different materials, colors, and sizes. Mix and match them to suit your style, create different patterns, and cover imperfections on your sublimation tumbler.

How to do it:

  1. Decide whether you want to cover the entire sublimation tumbler with rhinestones or create a smaller design to hide specific flaws. Then choose rhinestones in suitable sizes and colors.
  2. Lightly sand the areas where you plan to apply rhinestones with fine-grit sandpaper. This creates small scratches that help the adhesive bond better.
  3. (Optional) Choose acrylic paint or spray paint suitable for the tumbler's surface. Apply a base coat to the areas where you'll place your rhinestone design.
  4. Use a syringe or glue applicator to apply thin, even lines of adhesive to the tumbler. Work in small sections so the glue stays tacky while you place the rhinestones.
  5. Use a wax pencil rhinestone picker to pick up and place each rhinestone. Apply them one at a time, positioning each stone between two rhinestones in the row above for a neat, even pattern.
  6. Repeat until you reach the bottom of the tumbler or achieve your desired look. Add extra rhinestones where the spacing looks uneven or gaps are noticeable. Use smaller stones for tight or narrow areas.
  7. Carefully wipe away any excess glue around the rhinestones. Place the tumbler on a stable surface and let the adhesive cure for the time specified by the manufacturer. Don't touch or use the tumbler until it's fully cured.

Cover the Original Sublimation Design with Opaque Vinyl

If your sublimation tumbler has noticeable ghosting, uneven colors, or other printing flaws, you can wrap the entire tumbler with opaque vinyl to cover the original design.

How to do it:

  1. Choose a suitable opaque vinyl wrap. If you have a cutting machine like a Cricut and the necessary supplies, you can also design and cut adhesive vinyl sheets to fit your tumbler. Full tumbler wraps can be tricky to apply, so transfer tape can help position your pre-cut vinyl pieces.
  2. Before applying the vinyl, clean the tumbler surface and make sure it's completely dry. Dust, oil, and leftover residue can affect how well the vinyl sticks.
  3. Carefully align the vinyl with the tumbler and slowly wrap it around the surface. Use a scraper as you go to smooth out wrinkles and remove air bubbles.
  4. Once the entire tumbler is covered, carefully trim away any excess vinyl. Press down the edges to make sure the wrap sticks securely.

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

All comments are moderated before being published.

Read more

How to Engrave Powder-Coated Gold-Plated Tumblers - FASTSUB
Laser Engraving Guides

How to Engrave Powder-Coated Gold-Plated Tumblers

In this guide, you’ll learn how powder-coated gold-plated tumblers are made, what tools you’ll need, and how to engrave them step by step. Get ready to create clean, detailed engravings with a beau...

Read more